Automatic Machines · JC Series Model JC-157

Tablet Packing Machine

A counting machine rather than a weighing one. The volumetric dish counting system picks up a set number of pieces per cycle, which is what you want when the customer is buying a count — ten tablets, twenty pills — not a weight.

Fill range35–55 g
Packs / min20–22
Sealing3 / 4 / Centre
Net weight450 kg
Full specification ↓
JC-157 Tablet Packing Machine
The machine

What the JC-157 is for.

Volumetric dish counting for tablets, sugar-coated pills and chocolate balls.

The machine operates on the principle of filling by volumetric dish counting. The dish is configured for the piece size so that each cycle collects the same count, then releases it into the formed tube.

Every figure on this page is Packsol's published specification for the JC-157. Real output on your floor depends on your material's specific gravity and flow, your laminate and your fill size — which is exactly why we run a trial with your own product before quoting.

Counts, not weighs

For dose-form products the count is the product claim — this machine packs to it.

Gentle on coatings

Dish handling avoids the tumbling that chips sugar-coated tablets in an auger or vibratory system.

Three sealing formats

3-side, 4-side or centre seal to suit strip packs or retail pouches.

How it works

One cycle, step by step.

Film unwinds under tension

A roll of suitable width is mounted at the rear of the machine and fed through the unwinding assembly, held at constant tension.

The collar forms the tube

Film is drawn over the forming collar and down around the forming tube; the vertical sealer closes the back seam to make a continuous tube.

Product is dosed in

The machine operates on the principle of filling by volumetric dish counting. The dish is configured for the piece size so that each cycle collects the same count, then releases it into the formed tube.

Jaws seal and cut

Horizontal sealing jaws close the bottom, then the top of the filled pouch. The cutting device separates each pouch automatically.

Finished pouches discharge

Sealed pouches drop onto the take-away chute or optional conveyor, ready for cartoning.

Technical specification

The JC-157 on paper.

Published specification, exactly as Packsol states it. Check the electrical supply against what you have available before ordering.

Model numberJC-157
ApplicationSugar Coated Tablet, Medicine Tablet, Chocolate Pill, Round Sugar Ball
Sealing type3 Side / 4 Side / Centre Sealing
Packing / filling range35 g – 55 g (depending on specific gravity of the material)
Speed20 – 22 pouches / min
Packing sizeLength 100 – 280 mm · Width 200 – 400 mm
Packing materialAll heat-sealable laminate — PET/POLY, PET/FOIL/POLY MET, PET/POLY/CPP/OPP etc.
Motor½ hp, 220V single phase, 50–60 Hz
Heater400W × 4 pcs (3/4 side) · 150W × 2 + 400W × 2 (centre)
Machine dimensions875 × 750 × 2200 mm
Net weight450 kg (gross 480 kg)
Optional equipmentStainless steel cover, Gas flushing system, Product elevator, Batch printing unit, Conveyor

Get JC-157 pricing

Tell us your product and fill size — we'll quote properly.

Or call +91 99207 34394 · sales@packsolindustries.com

Applications

What the JC-157 packs.

Products Packsol lists for this machine. If yours is not here, send us a sample — most materials behave like something on this list.

Sugar Coated TabletMedicine TabletChocolate PillRound Sugar Ball

Optional equipment

Stainless steel coverGas flushing systemProduct elevatorBatch printing unitConveyor

Send us your product. We'll run it.

Post a sample with the fill weight and laminate, and we will trial it on the JC-157 at our Vasai works — so you see the finished pouch before you commit.

Still deciding?

Three questions and we'll
name the right model.

Our machine selector matches your product, fill size and required output against all sixteen machines.

Privacy Policy

Packsol Industries respects the privacy of every visitor and customer. This policy explains what we collect and how we use it.

What we collect

  • Your name, company, WhatsApp or phone number, email and city, when you submit an enquiry form on this website.
  • Details of the product you wish to pack, fill size, output requirement and laminate — supplied voluntarily so that we can quote accurately.
  • Standard technical information such as browser type and pages visited, used only to keep the site working properly.

How we use it

  • To respond to your enquiry, prepare a quotation and arrange a machine trial.
  • To provide after-sales service, spare parts and technical support for machines already supplied.
  • We do not sell, rent or trade your details to any third party.

WhatsApp enquiries

Enquiry forms on this site open WhatsApp with a pre-filled message. The message is sent only when you press send in WhatsApp, and is then handled under WhatsApp's own privacy terms in addition to ours.

Retention and your rights

Enquiry records are retained for as long as required for commercial and warranty purposes. You may ask us to correct or delete your details at any time by writing to sales@packsolindustries.com.

Terms of Use

Use of this website

This website is published by Packsol Industries, Vasai (East), Dist. Thane, Maharashtra. By using it you agree to these terms.

Specifications

  • All technical specifications, capacities, speeds and dimensions shown are indicative and taken from our standard machine range.
  • Achievable output depends on the specific gravity, flow behaviour and moisture of your material, the laminate used and the fill size. Figures quoted are not a guaranteed production rate.
  • We reserve the right to improve or alter machine design and specification without prior notice.

Quotations and orders

  • Nothing on this website constitutes a binding offer. A contract is formed only on our written quotation and your written confirmation.
  • Prices, delivery periods and payment terms are those stated in the current written quotation.

Intellectual property

All text, photographs, videos, drawings and machine designations on this site are the property of Packsol Industries and may not be reproduced without written permission.

Warranty & Service

Warranty cover

  • Machines are warranted against defects in material and workmanship for the period stated in the written quotation and invoice.
  • Warranty covers repair or replacement of defective parts manufactured by Packsol Industries.

Not covered

  • Consumable and wear items — heating elements, sealing rubbers, teflon tape, belts and similar parts.
  • Damage from incorrect voltage, poor earthing, unfiltered or wet compressed air, or operation outside the published specification.
  • Repairs, alterations or fitting of non-original parts carried out by anyone other than Packsol Industries or our authorised engineer.
  • Use of laminate or material other than that agreed at the time of trial and order.

Service and spares

  • We maintain a permanent full stock of spare parts at our works and with our commercial representation.
  • Trained service staff are available for commissioning, operator training, breakdown attendance and annual service contracts.
  • For fastest response, message the machine model and serial number on WhatsApp at +91 99207 34394.

Delivery & Installation

Delivery

  • Delivery periods are confirmed in the written quotation and run from the date of confirmed order and receipt of advance.
  • Machines are dispatched ex-works Vasai (East), Dist. Thane, unless agreed otherwise in writing.
  • Transport, insurance, octroi, entry tax and unloading at site are to the buyer's account unless expressly included in the quotation.

Site readiness

  • The buyer is to provide a level floor, the correct electrical supply as stated on the machine page, clean dry compressed air where applicable, and adequate working space around the machine.
  • Any lifting equipment required to place the machine in position is to be arranged by the buyer.

Installation and commissioning

  • Our engineers install, commission and run trial production, and train your operators on the machine.
  • Please have your production material and the agreed laminate available on the commissioning date so that trials reflect real running conditions.

Export

Export orders are quoted with appropriate seaworthy packing. Documentation and destination charges are as agreed in the export quotation.

Disclaimer

General

The information on this website is provided in good faith for general guidance about the Packsol Industries machine range. While we take care to keep it accurate, it is not a substitute for a written quotation and technical confirmation for your specific application.

Performance figures

Speeds, fill ranges and capacities are stated for standard conditions. Real output on your floor depends on your material, laminate, fill size, ambient conditions and operator skill. We strongly recommend a trial with your own material before ordering.

Customer names

Company names shown on this website are stated to indicate the industries and standards we supply to. They do not imply endorsement, and all trademarks remain the property of their respective owners.

Images and video

Photographs and videos are illustrative of machine type and operation. Machine appearance, guarding and optional attachments may differ from those shown depending on the model and options ordered.

External links

We are not responsible for the content or privacy practices of any external website linked from this site.

Download catalogue
Find machine Machines Call WhatsApp
P
Hi, I'm Priya 👋Packsol customer care

Not sure which machine suits your product? Tell me what you pack and I'll have the right specification sent to you on WhatsApp — usually within the hour.